Renovations
Electrical Renovation Services in Toronto and the GTA
From kitchen remodels to basement finishes and whole-home updates, Addis Electric plans and installs the electrical work that brings a Toronto or GTA renovation together.
Electrical Planning for Renovations Big and Small
A renovation is the best opportunity you will have to correct the electrical shortcomings of a space. Walls are open, layouts are changing and it is far easier to add circuits, move outlets and plan lighting now than after the drywall and finishes go up.
It is also the stage where poor planning costs the most. Outlets end up in awkward places, a new kitchen overloads an old panel, or lighting becomes an afterthought. Addis Electric can work alongside you, your designer or your general contractor to make sure the electrical plan supports how the space will actually be used.
What Our Renovation Electrical Work Covers
Renovation electrical work usually happens in stages that line up with the rest of the project.
Planning and layout
We review your drawings or walk the space with you to map out outlets, switches, lighting and appliance circuits. This is also when we check whether your existing panel and service can handle the added load.
Rough-in
With walls and ceilings open, we run new wiring, install boxes and set up dedicated circuits for appliances. Older wiring in the renovation area can be assessed and replaced where it makes sense. Permits and inspections are arranged where required.
Finishing
Once the walls are closed and finished, we return to install devices, fixtures and cover plates, then test everything so the room is ready to use. Lighting is often where a renovation really comes alive, and our pot light installation and lighting installation services fit naturally into this stage.
Benefits of Getting the Electrical Right During a Renovation
Thoughtful electrical planning is one of the least visible parts of a renovation and one of the most important.
-
A layout that fits your life
Outlets, switches and lighting go where you actually need them, based on how you plan to use each room.
-
Capacity for modern demands
Kitchens, home offices and finished basements often need more circuits than older homes were built with.
-
Updated wiring behind the walls
Open walls make it practical to replace outdated wiring in the renovated area.
-
Fewer surprises later
A planned approach helps avoid costly changes after finishes are installed.
Renovation Projects We Support
When a renovation adds significant load, an electrical panel upgrade may become part of the plan.
- Kitchen renovations and appliance circuits
- Bathroom renovations, including exhaust fans and lighting
- Basement finishing
- Home offices and additions
- Open-concept layout changes
- Lighting redesigns, including pot lights and under-cabinet lighting
- Replacing outdated wiring in renovation areas
- Panel upgrades to support added loads
- Commercial office and retail space improvements
Why Choose Addis Electric for Your Renovation
Renovations involve a lot of moving parts. We aim to make the electrical side one of the easier ones.
- Input from the planning stage. We prefer to join the conversation early, when changes are easy and inexpensive.
- Coordination with your project. We schedule rough-in and finishing around your other trades to help keep the renovation moving.
- Respect for your home. We work tidily and clean up after ourselves, knowing many clients live in the house during renovations.
- Residential and commercial capability. From a single room to a commercial space refresh, we tailor the work to the project.
Our Renovation Electrical Process
-
Review your plans
We go over drawings, finishes and how you intend to use the space.
-
Build the electrical plan
We map circuits, devices and lighting and confirm the panel can handle the new load.
-
Rough-in and inspection
We complete the wiring while walls are open, with permits and inspections arranged where required.
-
Finish and test
After drywall and finishes, we install fixtures and devices and test every circuit.
Renovation Electrical Work in Toronto and Across the GTA
Renovating in Toronto often means working with older houses: century homes, post-war bungalows and semis that have been updated piecemeal over the years. Opening a wall can reveal outdated wiring or past alterations that need to be addressed before new work goes in. Planning for that possibility makes budgets and timelines more realistic.
Condo renovations come with their own rules. Building management typically sets work hours, approval processes and limits on what can be changed, and concrete ceilings restrict where new lighting can go. Townhome renovations can involve shared walls and compact panels. We plan around these constraints instead of discovering them halfway through.
Across the wider GTA, many families are finishing basements, opening up main floors and updating kitchens in homes built in recent decades. Whether you are in Toronto or elsewhere in our service areas, we can help plan the electrical side of your project.
Electrical Renovations FAQs
When should I bring an electrician into my renovation?
As early as possible, ideally during planning. Early input helps confirm your panel can handle new loads and ensures outlets, lighting and circuits are placed where you want them before the walls are closed.
Will my renovation require a panel upgrade?
It depends on your current service and how much load the renovation adds. Kitchens with several new appliances, basement finishes and additions are the projects most likely to need more capacity. We assess this during planning.
Do renovation electrical projects need permits?
Most renovation electrical work needs a permit and inspection, particularly when new circuits are added. Arranging permits where required is part of how we run every renovation project.
Can you work with my general contractor?
Yes. We can coordinate our rough-in and finishing work with your general contractor and other trades to fit the project schedule.
Should I replace old wiring while the walls are open?
If the renovation exposes outdated or deteriorated wiring, replacing it while access is easy is usually far simpler than doing it later. We assess what we find and give you a clear recommendation.
Can you handle electrical work for condo renovations?
Yes, within the limits set by your condo corporation. We follow building rules on approvals and work hours and focus on the electrical within your suite.
Planning a Renovation?
Bring Addis Electric in early and build an electrical plan that supports your new space from day one.
Discuss Your Renovation Project
Share your plans or drawings and contact Addis Electric to talk through the electrical side of your renovation.